Heritage (Curved) - (White/Colour)

£24.81 £94.32

Heritage (Curved) Multicolumn Radiator

The process for specifying your curved Heritage is very simple, however it is important to be accurate with any dimensions to ensure your radiator is built correctly – there will be opportunity to double check all figures against technical drawings before finalising the order.

Please follow the 6 simple steps below and when you have completed them send us your design form via email, fax or post (details below). Once we have all your details we will prepare technical drawings and a quote for you to check and approve. Once approved, in writing, we will confirm your order and start production of your radiator. Your radiator will then be delivered direct to site in 7 weeks approx. from order confirmation.

Step 1. Work out the BTU output required to heat your room.  To do this you will need to have details to hand of the room height, width and depth, as well as the type of window glazing (single or double). 


Step 2. Work out the size of radiator needed to deliver the correct output for your room.  You only need to tell us the size of the straight radiator you require we will work out the bending and profile. Your straight radiator plus valves (allow an extra 80-140mm on your width) must be at least 100mm shorter than the width of your bay (known as the Chord). Please note you may require more than one radiator to heat your room.




When making curved radiators we can use 2, 3 or 4 column sections, in heights of 300mm, 400mm, 500mm, 600mm or 750mm with welded feet as standard (height is increased by 97mm with welded feet).


Step 3. Measure your Internal Curves.


Please consider the height of your window sill when choosing your section, allow at least 40mm gap between the sill and the top of your radiator, this will not only be more aesthetic but assist with air circulation and heat distribution.
Valves will be required and they add approximately 100mm - 160mm to the overall width of a radiator.


A. Measure the width of the bay (this is called the Chord, Dimension A shown above)
B. From the centre of the bay measure the distance to the skirting board if present (known as the camber, dimension B shown above)

The product has wall ties of 32mm - 42 mm which is the give from the wall to the back of the radiator, so you as long as they are long enough you take it from the skirting.

Please note

In order to calculate the radius of the radiator we assume a distance of 45mm between the wall and the back of the radiator. In addition to curve a radiator the internal radius must be a minimum of 1000mm for 2 and 3 column radiators and 1300mm for 4 column radiators. We will contact you if there are any issues in achieving the correct curve for your dimensions.


Step 5; We will review your details and prepare technical drawings of your radiators, which we will send to you for you to check and approve.


Step 6; Review and approve your drawings (or comment as required), return a signed copy for our records. Before confirming your order please consider the access available on your site, as we will deliver direct to you and need to ensure the radiator can be moved into the building without difficulty. Curved radiators need careful handling and should not be carried like a stretcher, radiators should always be carried in an upright position (as shown below - handling and fittings instructions will be supplied at a later date).
Once we have a signed copy of your technical drawing we will confirm our order and put your radiator into production.

Delivery to site:
In order to ensure your new radiator is delivered in perfect condition we will deliver direct to your site. To facilitate this please take note of the following conditions;

1. Radiators will be delivered on a pallet and should be left on this until required for installation.

2. Deliveries will be made to the nearest hard standing area, it is important that suitable assistance is available on site to help off load the delivery.  Delivery is kerbside.

3. Radiators should be moved under cover to protect from adverse weather conditions.

2 Column - Curved - (output per section) - Depth 65mm

3 Column - Curved - (output per section) - Depth 101mm 

4 Column - Curved - (output per section) - Depth 139mm

BTU/Watts calculated at Delta 50.

Why buy the Heritage Curved Multicolumn Radiator from Hot Interiors?

* High Street Showroom
* We ONLY sell radiators
* Expert Advice
* Over 150 radiators on display in our premier showroom
* Super fast delivery on stock items
* Help available up to 10pm including Sunday!
* Low prices
* Informative and secure website
* Hundreds of happy customers
* Authorised retailer
* Trading since 2006


The radiator is available in a Gloss Traffic White (RAL 9016) (Standard)

You can also choose from various RAL colours or special colours.

Popular Colours/Finishes are - 

Matt White (this is from the COLOUR choice)

Matt Black 

Textured Matt Black

Matt Anthracite

Gun Metal Grey

Pearl Grey

Textured White & Textured Ivory

Mottled Silver/Mottled Bronze and Mottled Copper

Lacquered Bare Metal

How to order.

(1) Enter the Camber Required (Depth) in mm

(2) Enter the Chord Required (Width) in mm 

(3) Choose colour, standard is Gloss Traffic White (RAL 9016) or Gloss Pure White (RAL 9010) or  188 RAL Colours/31 Special Finishes.

If you choose Traffic White or Pure White - ensure you choose the drop down that includes the White section.

(4) Choose the size required.

This will be based on Column Depth (2, 3 or 4).

The Height - 300mm, 400mm, 500mm, 600mm or 750mm

(5)  Increase the quantity tab by the number of sections required - eg 10 sections required - the quantity should show as 10.

Each sections is 45mm.  Therefore you change the quantity to 10, the size of the radiator is 45mm x 10 plus 24mm for the side bushes.  Total Length is therefore 474mm 


Section Length

 10  - (L)474mm, 11 - (L)519mm, 12- (L)564mm, 13 - (L)609mm,

14 - (L)654mm, 15 - (L)699mm, 16 - (L)744mm, 17 - (L)789mm,

18 - (L)834mm, 19 - (L)879mm, 20 - (L)924mm, 21 - (L)969mm,

22 - (L)1014mm, 23 - (L)1059mm, 24 - (L)1104mm, 

25 - (L)1149mm, 26 - (L)1194mm, 27 - (L)1239mm, 

28 - (L)1284mm, 29 - (L)1329mm, 30 - (L)1374mm, 

31 - (L)1419mm, 32 - (L)1464mm, 33 - (L)1509mm,

34 - (L)1554mm, 35 - (L)1599mm, 36 - (L)1644mm, 

37 - (L)1689mm, 38 - (L)1734mm, 39  - (L)1779mm, 

40 - (L)1824mm


IF YOU REQUIRE THE WELDED FEET OPTION - please also follow the next step otherwise please proceed to the CART and enter your details.


(6) If you require the optional Welded Feet please click here. 

2 feet are required for up to 20 sections
3 feet are required for 21 - 39 ODD number of sections
4 feet are required for 22 - 40 EVEN number of sections
£24.00 UK MAINLAND delivery ONLY.  We do NOT delivery to non mainland UK.
The radiator is made to order.  The estimated lead time is 6 - 8 weeks from sign off.
Please note that the factory in Italy closes 3 weeks in Easter, All of August and 3 weeks over Christmas/New Year.

Share this Product